6mm PVC Clip on Bead with Mesh for Base Bead x 2.5mtr
Stock Availability
- Basildon:
- In Stock
- Newcastle-under-Lyme:
- In Stock
- Scotland:
- In Stock
- Wales:
- In Stock
PVC clip-on profile with embedded glass fibre mesh designed for use with aluminium base profiles in ETICS applications. It supports the required reinforcement layer thickness at the front edge of the base profile. Supplied in rigid PVC with ETAG-approved E-glass mesh. Suitable for forming the horizontal finish of insulation boards in ETICS installations.
This PVC clip-on profile is intended as a supplementary component for horizontal finishing of insulation boards used within ETICS installations that incorporate aluminium base profiles. It is designed to ensure the correct thickness of the reinforcement layer at the front edge of the base profile.
The profile is manufactured from rigid PVC and is supplied with an integrated E-glass mesh fabric. The mesh has a 4x4mm grid and is ETAG-approved. The product is alkali-resistant, plasticiser-free, and the fabric is described as slip-resistant with high tensile strength.
Application and Intended Use
The profile is used as a supplement to the aluminium base profile in ETICS systems. Its function is to support the reinforcing layer by providing a defined plaster thickness of 6mm in the critical front edge area of the base profile.
It is suitable for use following installation of the aluminium base profile and bonding of the insulation boards.
Installation Considerations
After installing the aluminium base profiles and fixing the insulation boards, the clip-on profile is pushed onto the front upstand of the aluminium profile. The integrated mesh strip is then embedded into the reinforcing mortar.
The surface reinforcement fabric must overlap by at least 10cm and must extend to the kink in the drip edge. The drip edge acts as a pull-off edge for the surface reinforcement.
All relevant ETICS system owner guidelines, recognised construction standards, and general trade regulations must be observed when installing or specifying this product.
Material and Construction
-
Rigid PVC profile
-
Integrated E-glass fabric, ETAG-approved, 4x4mm mesh
-
Fabric width: 10cm
-
Profile length: 250cm
-
Plaster thickness: 6mm
-
Colour: white
Storage and Handling
The profiles should be stored flat, in dry rooms, and protected from direct sunlight.
Packaging
Supplied as 20 pieces per carton.
Additional Notes
Applicable standards, regulations, and any system-specific technical data sheets must be followed in conjunction with this product.
Technical Data
| Property | Value |
|---|---|
| Material | Rigid PVC with E-glass fabric (ETAG-approved), 4x4mm mesh |
| Length | 250cm |
| Fabric width | 10cm |
| Plaster thickness | 6mm |
| Colour | White |
| Packaging | 20 pieces/carton |
| Storage | Store flat in dry rooms; protect from direct sunlight |




